Search the Community
Showing results for tags 'root cause analysis'.
-
Q 717. Can 5 Whys be used for all root cause analyses, or are there better alternatives? Support your answer with examples of situations where 5 Why is advisable and also situations where it is not advisable. Note for website visitors - This platform hosts two weekly questions, one on Tuesday and the other on Friday. All previous questions can be found here: https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/. To participate in the current question, please visit the forum homepage at https://www.benchmarksixsigma.com/forum/. The question will be open until Tuesday or Friday at 5 PM Indian Standard Time, depending on the launch day. Responses will not be visible until they are reviewed, and only non-plagiarised answers with less than 5-10% plagiarism will be approved. If you are unsure about plagiarism, please check your answer using a plagiarism checker tool such as https://smallseotools.com/plagiarism-checker/ before submitting. All correct answers shall be published, and the top-rated answer will be displayed first. The author will receive an honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term. Some people seem to be using AI platforms to find forum answers. This is a risky approach as AI responses are error prone as our questions are application-oriented (they are never straightforward). Have a look at this funny example - https://www.benchmarksixsigma.com/forum/topic/39458-using-ai-to-respond-to-forum-questions/ We also use an AI content detector at https://quillbot.com/ai-content-detector. Only answers with less than 45-50% AI-generated content will be approved.
-
TapRoot Analysis
Vishwadeep Khatri posted a question in We ask and you answer! The best answer wins!
Q 704. What is TapRoot Analysis? Compare its benefits and limitations vs other RCA techniques like Fishbone Diagram and 5 Why Analysis. Provide examples where TapRoot Analysis is better suited than other RCA techniques. Note for website visitors - This platform hosts two weekly questions, one on Tuesday and the other on Friday. All previous questions can be found here: https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/. To participate in the current question, please visit the forum homepage at https://www.benchmarksixsigma.com/forum/. The question will be open until Tuesday or Friday at 5 PM Indian Standard Time, depending on the launch day. Responses will not be visible until they are reviewed, and only non-plagiarised answers with less than 5-10% plagiarism will be approved. If you are unsure about plagiarism, please check your answer using a plagiarism checker tool such as https://smallseotools.com/plagiarism-checker/ before submitting. All correct answers shall be published, and the top-rated answer will be displayed first. The author will receive an honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term. Some people seem to be using AI platforms to find forum answers. This is a risky approach as AI responses are error prone as our questions are application-oriented (they are never straightforward). Have a look at this funny example - https://www.benchmarksixsigma.com/forum/topic/39458-using-ai-to-respond-to-forum-questions/ We also use an AI content detector at https://quillbot.com/ai-content-detector. Only answers with less than 45-50% AI-generated content will be approved.- 4 replies
-
1
-
- taproot analysis
- rca
-
(and 1 more)
Tagged with:
-
Q 653. ACPT analysis is a common RCA tool used in contact centers. Explain its structure along with an example. Are there any use cases that it can be used outside of contact centers as well? Note for website visitors - This platform hosts two weekly questions, one on Tuesday and the other on Friday. All previous questions can be found here: https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/. To participate in the current question, please visit the forum homepage at https://www.benchmarksixsigma.com/forum/. The question will be open until Tuesday or Friday at 5 PM Indian Standard Time, depending on the launch day. Responses will not be visible until they are reviewed, and only non-plagiarised answers with less than 5-10% plagiarism will be approved. If you are unsure about plagiarism, please check your answer using a plagiarism checker tool such as https://smallseotools.com/plagiarism-checker/ before submitting. All correct answers shall be published, and the top-rated answer will be displayed first. The author will receive an honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term. Some people seem to be using AI platforms to find forum answers. This is a risky approach as AI responses are error prone as our questions are application-oriented (they are never straightforward). Have a look at this funny example - https://www.benchmarksixsigma.com/forum/topic/39458-using-ai-to-respond-to-forum-questions/ We also use an AI content detector at https://crossplag.com/ai-content-detector/. Only answers with less than 15-20% AI-generated content will be approved.
- 6 replies
-
- acpt analysis
- rca
-
(and 1 more)
Tagged with:
-
Q 403. What is an Escape Point? Elaborate on how it can be used effectively in a DMAIC project? Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening 5 PM as per Indian Standard Time. Questions launched on Tuesdays are open till Friday and questions launched on Friday are open till Tuesday. When you respond to this question, your answer will not be visible till it is reviewed. Only non-plagiarised (plagiarism below 5-10%) responses will be approved. If you have doubts about plagiarism, please check your answer with a plagiarism checker tool like https://smallseotools.com/plagiarism-checker/ before submitting. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term
- 9 replies
-
1
-
- escape point
- rca
-
(and 1 more)
Tagged with:
-
Q. 157 While solving problems, root cause analysis is considered as an obvious step. When is it that one should refer to a “cause” as the “root cause”? (or a set of “causes” as “root causes”) The most comprehensive answer wins. Do try to consider varying situations. If answers are similar in detail, those with examples will get preference over others. Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening as per Indian Standard Time. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term.
- 26 replies
-
1
-
- root cause analysis
- problem solving
-
(and 3 more)
Tagged with:
-
Sensitivity Analysis
Vishwadeep Khatri posted a question in We ask and you answer! The best answer wins!
Q. 144 How does Sensitivity Analysis relate with Root Cause Analysis? Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening as per Indian Standard Time. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term.- 9 replies
-
1
-
- rca
- root cause analysis
-
(and 2 more)
Tagged with:
-
Q. 121 It is noticed that data collected for problem solving during Gemba walks is not always reliable. A useful approach for evaluating data is the "KNOT technique". Explain the utility of KNOT technique with a suitable example. Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening as per Indian Standard Time. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term.
- 1 reply
-
- rca
- gemba walk
-
(and 8 more)
Tagged with:
-
Root Cause Analysis
Vishwadeep Khatri posted a question in We ask and you answer! The best answer wins!
Q2. Root cause analysis is essential to problem-solving. However, there are four possibilities - (you may watch this video to understand more - https://tinyurl.com/ybtjmnof ) A cause may be necessary but not sufficient for a problem to occur. A cause may be sufficient but not necessary for a problem to happen. A cause may be neither sufficient nor necessary for a problem to occur. A cause may be both sufficient and necessary for a problem to occur. How should our approach to problem-solving change for each of the above situations? Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening 5 PM as per Indian Standard Time. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term.- 40 replies
-
- problem solving
- rca
-
(and 2 more)
Tagged with:
-
Q46. Segmenting large sets of data into smaller segments is a common practice when analysis is done on data sets. In what different ways does segmentation relate to Root Cause Analysis? Note for website visitors - Two questions are asked every week on this platform. One on Tuesday and the other on Friday. All questions so far can be seen here - https://www.benchmarksixsigma.com/forum/lean-six-sigma-business-excellence-questions/ Please visit the forum home page at https://www.benchmarksixsigma.com/forum/ to respond to the latest question open till the next Tuesday/ Friday evening 5 PM as per Indian Standard Time. The best answer is always shown at the top among responses and the author finds honorable mention in our Business Excellence dictionary at https://www.benchmarksixsigma.com/forum/business-excellence-dictionary-glossary/ along with the related term.
- 14 replies
-
- segmentation
- rca
-
(and 1 more)
Tagged with: